Enjoy an 80% improvement in upward visibility with clear sightlines for easier operation when lifting bales or doing loader work above the cab with the Panorama roof on the premium cab.
Compared to previous models.

Whether it’s added on or available from the factory, an abundance of technology options are available. From AutoTrac™ to JDLink™ to GreenStar™/ISOBUS ready, your John Deere Dealer can help you decide what technology options are available to bring more efficiency to your operation.

The 5M can maneuver into tight spaces, like barns, alley ways, through gates or mowing around obstacles. With a maximum steering angle of 50 degrees and a shorter turning radius of 12.6 ft. (3.85 m), the 5M is designed for tight areas.

Answer text goes here
Wheel or Track Configuration | Wheel |
Drive Type | Mechanical front-wheel drive (MFWD) or two-wheel drive (2WD) |
Engine Make | John Deere |
Emissions Certifications | Final Tier 4 |
Aspiration | Turbocharged, wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation |
Cylinder Liners | Wet-sleeve |
Aftertreatment Type | Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR) |
Rated Engine Power | 85 hp |
Rated Engine Power | 63 kW |
Rated Engine Power | 86 PS |
Maximum Engine Power | 85 hp |
Maximum Engine Power | 63 kW |
Maximum Engine Power | 86 PS |
Maximum Engine Torque | 494 Nm (364 lb-ft) |
Fuel Type | Diesel |
Alternative Fuel Type | B20 diesel compatible |
Transmission Type | Standard: John Deere 12F/12R PowrReverser™ transmission; Optional: John Deere 12F/12R PowrReverser transmission with creeper; John Deere 24F/12R PowrReverser transmission |
Maximum Speed Forward | 12F/12R PowrReverser transmission: 30 km/h (19 mph); 24F/12R PowrReverser transmission: 40 km/h (25 mph) |
Creeper | Optional |
PTO Category | Independent; 35 mm (1.375 in.) 540 rpm/1000 rpm reversible shaft |
Rear Hitch Category (SAE Designation) | Standard: Category 2 standard lift; Optional: Category 2 heavy-duty lift |
Sensing Type | Optional |
Drawbar Category | Standard: Category 2; Optional: Category 2 heavy duty |
Maximum Vertical Load | Standard: Category 2, 1000-1250 kg (2205-2756 lb); Optional: Category 2 heavy duty, 1200-1900 kg (2645-4189 lb); Maximum vertical load is dependent on drawbar position. |
Hydraulic System Type | Open-center; Gear driven |
Pump Rated Output | 36.5 cc pump: 75.7 L/min (20 gpm) |
Available Flow at a Single Rear SCV | 75.7 L/min (20 gpm) |
SCV Control | Mechanical |
Front Axle Type | Standard: Mechanical front-wheeled drive (MFWD); Optional: Two-wheel drive (2WD) |
Front Axle Differential Lock | MFWD: limited slip; 2WD: None |
Rear Axle Type | Flange |
Rear Differential Lock | Full-locking mechanical |
Final Drive | Inboard Planetary |
Steering Type | Hydrostatic power |
Wheel Tread Range | 2WD: 1533–2043 mm (60.4–80.4 in.); MFWD: 1516–2016 mm (59.7–79.4 in.) |
Alternator Capacity | 90 amp |
Seat Suspension | Standard: Mechanical suspension; Optional: Air suspension |
Instructional Seat | Optional |
Primary Display | LCD instrument cluster |
Fuel Tank Capacity | 44.4 gal. |
Fuel Tank Capacity | 168 L |
Country of Manufacture | Pune, India |
Date Collected | 9-Oct-2019 |
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Cookie Notice
Our website uses cookies and other similar technologies to improve our site and your online experience. By continuing to use our website you consent to cookies being used. Click here to view our Privacy Policy for more information.









