Redesigned folding and wing placement lower height and narrow width in transport, making it simpler to move the 2430C between fields and under obstacles.

The robust frame design with a 3.4 m front-to-back span allows high residue flow and precise nutrient placement. The design offers structural integrity and accessibility, providing consistent operating depth and reduced maintenance time.

TruSet™ Tillage Technology provides precise depth control, essential for moisture conservation and optimal fertilizer placement. It allows for depth adjustments on-the-go, enhancing productivity and soil management.

Answer text goes here
Fore-And-Aft Clearance | 11.17 ft |
Fore-And-Aft Clearance | 3.4 m |
Underframe Clearance | 44 in. |
Underframe Clearance | 110 cm |
Blade Type | Concave notched |
Disk Blade Diameter | 18 x 0.118 in. |
Disk Blade Diameter | 460 x 3 mm |
Maximum Down Pressure | 50 lbf |
Maximum Down Pressure | 222 N |
Mounting | Independently mounted arms with pin adjustment |
Side To Side Adjustment Range | 8.8 - 17 in. |
Side To Side Adjustment Range | 220 - 460 cm |
Trip Height | 19.5 in. |
Trip Height | 465 cm |
Blade Diameter | 22 x 0.177 in. |
Blade Diameter | 560 x 4.5 mm |
Blade Spacing | 30 in. |
Blade Spacing | 76.2 cm |
Coulter Downforce | 600 lbf |
Coulter Downforce | 2669 N |
Centerframe Width | 12 ft |
Centerframe Width | 3.66 m |
Overall Length | 32 ft |
Overall Length | 9.75 m |
Transport Height | 14 ft, 1 in. (4.3 m) |
Transport Width | 19 ft, 8 in. (6 m) |
Working Width | 47.5 ft |
Working Width | 14.5 m |
Depth Control System | TruSet depth control system and single-point depth control system |
Frame Flex - Down | 15 degree (angle) |
Frame Flex - Up | 10 degree (angle) |
Hitch Link | Category 4 or 5 |
Hitch System | Pull type: Floating hitch; Rigid T-hitch - 6 x 12 in. (152 x 305 mm) |
Rear Hitch | Fore/aft and side-to-side adjustable drawbar |
Rear Hitch Maximum Gross Vehicle Weight (GVW) | 25000 lb. |
Rear Hitch Maximum Gross Vehicle Weight (GVW) | 11300 kg |
Fold Type | Five-section fold |
Number Of Rows | 19 |
Row Spacing | 30 in. |
Row Spacing | 76.2 cm |
Standard Options - Conventional Knife Options With Coulters And Closing Disks | Conventional or mole knife |
Number Of Standards | 19 |
Standard Operating Depth Range | 3 - 12 in. |
Standard Operating Depth Range | 76 - 305 cm |
Standard Options | Tru-Depth™ conventional |
Standard Spacing | 30 in. |
Standard Spacing | 76.2 cm |
Standard Trip Force | 1250 lbf |
Standard Trip Force | 5560 N |
Standard Trip Height | 11 in. |
Standard Trip Height | 280 cm |
Tire Configuration | Mainframe tires: 320/70R15 145D (six); Inner wing tires: 320/70R15 145D (two), 280/70R15 134D (four); Outer wing tires: 280/70R15 134D (six) |
Wheel Mounting | Castering front with walk-over tandem rear |
Operating Speed | 8 - 16 km/h |
Engine Horsepower Requirement | 360 - 520 hp |
Engine Horsepower Requirement | 268.5 - 387.8 kW |
Operating Speed | 5 - 10 mph |
Selective Control Valves (SCVs) Required | 2 |
Conventional Machine Weight | 26320 lb. |
Conventional Machine Weight | 11939 kg |
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Cookie Notice
Our website uses cookies and other similar technologies to improve our site and your online experience. By continuing to use our website you consent to cookies being used. Click here to view our Privacy Policy for more information.
